Unitary Duct Split Unitary Duct Split
10
Fig.10
Fig.11
Fig.12
Fig.13
Fig.14
6 Install the connection pipes
Connect the connect pipe with the two relative leading pipe, tie the nut on tie
–in of
the connect pipe tightly.
Caution
！
＊
Be careful in bending the connection pipes, or you will damage the pipes.
＊
If the tightening torque is too great in tightening the flare nut, leakage will
happen.
＊
The temperature of refrigerant circuit will be high, please keep the
interconnection away from the copper tube.
