background image

SC24

Description

DIP 1
DIP 2

DIP

OFF
OFF

Status

Function

STEP–BY-STEP

WITH STOP 

8 - DIP SWITCH SW1

The settings are stored during the rest phase (gate closed).

OFF

ON

CONDOMINIUM 

ON

OFF

STEP–BY-STEP

DIP 3

If Start button is held down:

OPENS

If Pedestrian button is held down:

CLOSES

The SAFETY 8K2,  PHOTO inputs and the decelerations will not be active.
STOP 8K2 will be enabled.
Not manageable with radio control.

Enables the pre-flashing of 3 seconds before the activation of the motor in opening and 
closing. 

Disables the pre-flashing. 

ON
ON

ON

OFF

DEAD MAN 

PRE-FLASHING 

Operation in reply to a START command:

Ÿ

 Gate closed

  

OPENS

Ÿ

 During opening 

  

STOPS

Ÿ

 Gate open      

  

CLOSES

Ÿ

 During closing 

  

STOPS

Ÿ

 After a STOP

  inverts the motion

Operation in reply to a START command:

Ÿ

 Gate closed

  

OPENS

Ÿ

 During opening 

  

CLOSES

Ÿ

 Gate open      

  

CLOSES

Ÿ

 During closing 

  

OPENS

Operation in reply to a START command:

Ÿ

 Gate closed

  

OPENS

Ÿ

 During opening 

  

IRRELEVANT

Ÿ

 Gate open      

  

Recharges the automatic closing time if the automatic 

reclosing is enabled, otherwise closes.

Ÿ

 During closing 

  

OPENS

The DEFAULT settings are coloured in grey

6 - ELECTRICAL CONNECTIONS: FASTON

7 - PROTECTION FUSES

UK

13

0 Vac

18 Vac

24 Vac

Faston

Description

Transformer 0 Vac connection (black cable).                            

Transformer 18 Vac connection (orange cable).

Transformer 24 Vac connection (red cable).

Protects the ACCESSORY and SAFETY DEVICE power supply.

315 mA

FAST-BLOW

Protects the control unit at the 24 VAC power supply input.

Protects the flashlight output.

5 A

500 mA

FAST-BLOW

FAST-BLOW

F1

F2

F3

Description

Position

Value

Type

Summary of Contents for GI.BI.DI SC24





















Reviews: