EN
Original operating instructions 11/2014
GHOST EPAC
E-HYBRIDE ANDASOL & ANDASOL X
E-HYBRIDE TERU & TERU FS
120
2. Pull the respective brake lever with the bike at a standstill and hold the
brake lever in this position. The pressure point must not move.
3. Inspect the brake system visually from the brake lever along the lines up to
the brakes. No hydraulic fluid should escape at any point.
4. Inspect the brake disc for damage. It must not exhibit any dents, cracks,
deep scratches or other mechanical damage.
5. Raise the front and rear wheels alternately and turn the wheel by hand.
The brake disc must run smoothly.
6. Inspect your brake discs for soiling, in particular for oil and grease.
Clean the soiled brake discs immediately. (See
section 14.2, How to clean
and care for your EPAC
).
6.8
Inspecting the drive and chain
1. Ask someone to help you to lift the bicycle so that the rear wheel is no
longer in contact with the ground.
2. Turn the right-hand pedal arm in a clockwise direction and observe the
chainwheel and the sprocket assembly from above.
The chainwheel and sprocket must not have any lateral runout.
There must not be any foreign matter in any of the components.
Remove any such foreign matter if it is easy to do so.
3. Press the left-hand pedal arm towards the chain run in the position shown.
You should not feel any bearing play.
No cracking or grinding noises should be heard.
