TTM-000W Series
32 / 37
BA_MA_TTM-00XW_EN_V1.00
8
Blind Setting Mode
With blind-mode-function, parameter sets (
5ET0
…
7
) or individual parameters from the configura-
tion level can be hide to the user.
When the power is turned ON, “Input Type
screen“ will be displayed for 4 seconds before
mov
ing to “Operation Mode“
for more than 10 seconds. First
5ET1
will be shown, followed of
. Keep button pressed until dis-
plays blinks one time
Press in fast order:
key once,
key once.
Blind Setting Mode
Blind setting of Set point. Change with
for more than 2 seconds for blind mode
of
SET1
…
7
. Change with
Setting Mode Blind Screen
5Et0
5ET1
5ET2
5ET3
5ET4
5ET5
5ET6
5ET7
off
on
on
on
on
on
on
off
Selecting SET
0…7 with up and down. Selecting the next set parameter with .Change of visibility with
Priority Screen
Setting Mode
Initial Setting
Mode
Control
Setting Mode
EV Out 1
Setting Mode
EV Out
2 Setting
Mode
DI Input
Setting Mode
Communication
Setting Mode
Timer
Setting Mode
In blind setting mode. “ON” and “OFF” will be displayed under each character (Set Point display area).
“ON” to display and “OFF” to hide (blind).
The FUNC key can switch “ON” and “OFF”. Press mode key to change these setting item under the blind mode (the
same procedure as that in the ordinary mode).
To end the blind mode turn the power OFF.
Power ON
Display Initial Screen
(4 seconds)
Operation Mode
Display blinks
__
5u1
ON
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
FUNC
MODE
FUNC
MODE
FUNC
MODE
FUNC
