GHM Messtechnik GmbH
●
Honsberg office
Tenter Weg 2-8
●
42897 Remscheid
●
Germany
Tel49 (0) 2191 9672-0
●
www.honsberg.com
2
1.2
Safety notes
Read the product information before activating the device. Ensure that the product is
indefinitely suitable for the usage in question.
The operator is responsible for the error-free operation of the device. He is obligated to
determine and observe adherence to the required work and safety measures of the respectively valid
stipulations during the full duration of application.
1.3
Product liability and warranty
This operating manual contains the instructions for assembling and operating the device safely in the
stipulated manner. Should any difficulties arise that cannot be solved by using the operating manuals
and product information, additional information must be retrieved from the manufacturer. The
manufacturer reserves all rights to technical changes and improvements. Usage of this operating
manual requires the appropriate qualification of the user. The operating personnel is also subject to
the operating manual.
1.4
Standards and guidelines
Dependent on: RoHS - Guideline 2002/95/EC
Oftentimes, with applications, the necessity arises to ensure minimal care, e.g. with lubrication or
coolants. With the flow devices PO, WR1, FR, RM and HV a visual flow monitor of fluid media can be
facilitated. The rotor/
turbine rotation visualizes the volume flow.
2.1
Active principle
Rotor
The liquid medium enters into the housing and takes the visible arranged rotor in rotation.
The
frequency of the rotor allows a subjective evaluation of flow volume.
Turbine
The liquid medium enters into the housing and makes the turbine in rotation. The rotor turns in
proportion to the flow volume.
2.2
Product contents
Enclosed with the product are an operating manual and the corresponding product information.
To avoid any transportation damages, the devices are equipped with threaded plugs or protective
bags.
2.3
Appropriate usage
The flow indicator serves to visually monitor the flow of the medium. The device may only be
employed for the medium stated in the product information.
This product is intended for application in machinery and facilities and for the application of
media of the fluid group II as per Guideline 97/23/EC. The product does not fall under
Guideline 97/23/EC and also receives no CE label in accordance with this guideline. The stated limit
values may never be exceeded (the data can be found in the product information).
2
Product description
