GHARiENi 601 Instruction Manual Download Page 62

Page: 62 / 82

16.1 Cleaning the PU upholstery

❖

Clean the PU

only

with a soft cloth with a small amount of a detergent

suitable for this material (also available from Gharieni: see chapter 18.

UPHOLSTERY CARE AND CLEANING AGENTS

16.2 Cleaning and care of the Ferrari Stamskin

❖

Clean the artificial leather

only

with a soft cloth with a small amount

of a detergent suitable for this material (also available from Gharieni:

see chapter 18.

UPHOLSTERY CARE AND CLEANING AGENTS

NOTICE!

The upholstery of the 601 can also be Ferrari Stamskin Top.

This material can be cleaned with a cloth with some detergent,
which must be suitable for this material.

16.3 Cleaning the housing and the fittings

❖

Clean the housing and the fittings

only

with a soft cloth with a small amount

of a detergent suitable for this material (also available from Gharieni:

see chapter 18.

UPHOLSTERY CARE AND CLEANING AGENTS

WARNING!

Always

make sure that water or other liquids

never

enter

the housing, fittings, or the hand control of the 601.
RISK OF ELECTRIC SHOCK! FIRE HAZARD!

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands