GHARiENi 601 Instruction Manual Download Page 38

Page: 38 / 82

GAS SPRING LEVER

of the armrest

LOCKING PIN

NOTICE!

The armrests may only be swivelled without load! Do not lean

against the armrests! Never stand, sit, or kneel on the armrests!
RISK OF DAMAGE!

NOTICE!

Maximum

load of the armrests is

25 kg

. RISK OF DAMAGE!

10.7.2 Additional locking mechanism of the armrests

❖

The armrests of the 601 can also be locked using a locking knob on the side of

the bed (see fig.).

❖

This additional locking ensures increased stability and safety of the armrests and

should be done after each treatment.

LOCKING THE

RMRESTS

To lock the armrests,

push the inner red knob inwards

The armrests are now locked.

ELEASING THE LOCKING MECHANISM

To release the lock,

pull

the outer

black knob

towards you.

The additional locking of the armrests is released.

Illustration similar: color, upholstery and design may vary depending on the model.

NOTICE!

To swivel the armrests, the additional locking mechanism

must

be released, and the armrest must be slightly lowered

so that they

are not at the level of the locking mechanism (s. fig.). Otherwise the
construction and the mechanics of the armrests can be permanently
damaged. RISK OF DAMAGE!

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands