GGS-Data Style-Note 874xTG, User Manual

Page: 214 / 216

Windows 7 Information
D - 18 Windows 7 Driver Installation
D
HSPA Modem Interface Installation
1. Enable power to the module by pressing the Fn + key combination (give the module about 10 sec-
onds to power on - the on-screen icon will indicate the module’s power status).
2. If a Found New Hardware window appears, click Cancel in all windows that appear, and then pro-
ceed to install the driver as below.
3. Insert the Device Drivers & Uti User’s Manual disc into the CD/DVD drive.
4. Click Option Drivers (button).
5. Click 3.Install 3G Driver > Yes , and then click Next .
6. Click Next > Install .
7. Click Finish to restart the computer.
8. Access the HSPA Modem Interface from the Start menu ( Start > Programs/All Programs > HSPA
modem ), or by double-clicking the HSPA modem icon on the desktop.
Wireless Device Operation Aboard Aircraft
The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the module(s) are OFF if you are
using the computer aboard aircraft.
Use the Fn + key combination to toggle power to the 3.75G/HSPA module, and check the indicator to see if the module is powered
on or not (see Table 1 - 4, on page 1 - 13 / Table 1 - 2, on page 1 - 9 ).