38
Peakanalyzer Installation Manual Version 2.6
4.3
Change network settings of a Peakanalyzer
Picture 29: Change network settings of a Peakanalyzer
The properties of the Peakanalyzer can be queried by selecting the menu point "Diagnosis
system"
→
Properties or the button Properties in the navigation bar at the bottom. For this
action an active LAN connection to the Peakanalyzer must be established.
On the tab system the network configuration of the Peakanalyzer is listed. By clicking on the
button Change the network settings of the Peakanalyzer can be modified. A new window will
open where the following information can be set:
•
Resolve IP Address automatically
The Peakanalyzer requests the network configuration
from an existing DHCP-Server
•
IP-Address
•
Subnet mask
•
Gateway
•
DNS-Server
•
Ports
TCP and UDP Ports for the communication to the Peakanalyzer