10
Peakanalyzer Installation Manual Version 2.6
2
Installation of hardware
2.1
Variants of the Peakanalyzer
The Peakanalyzer is delivered as a complete device in an IP65 steel box. The steel box exists
with two different dimensions. Alternatively the rail components are delivered as individual
components for assembling in a control cabinet. Furthermore it may be practical to distribute
the measurement terminals in the field in separate boxes. The concrete type depends on the
local requirements and the contractual agreement. The installation of the hardware is
described for the variant as complete device in an IP65 steel box. The installation in a control
cabinet and the distributed systems should be based on this description.
2.2
Mechanical mounting of the Peakanalyzer
The Peakanalyzer should be installed as close as possible to the measurement object. Thus
there is no need for additional signal amplifier or shielding action.
Picture 1: Physical dimensions Peakanalyzer width 300 mm
Picture 2: Physical dimensions Peakanalyzer width 400 mm
The Peakanalyzer should be mounted as vibration free as possible. Besides a fan, the
Peakanalyzer does not contains any moveable parts. However strong, permanent vibrations
can lead to mechanical damages or contact problems.