ON/OFF LED
PRESET LED
Orange
:
Preset A,
Green
:
Preset B
2
User Manual
TEMPO LED
Momentary Operation
< when bypassed >
~ Holding the Engage/Ramp button down for at least 1/2 sec triggers
mo-
mentary operation
, i.e pedal will revert to bypassed state when footswitch is released.
Ramping
< when engaged >
~
Holding the button for at least 1/2 sec triggers
ramping operation
: a
mapped parameters is ramped from its initial value to pre-configured final value, and stays at
that final value for as long as the footswitch is held down. When switch is released the parame-
ter gradually returns to its initial value.
A/B - TAP switch Priority.
Priority for the A/B-TAP footswitch can be reversed in Global setting (see page 6 for details).
A/B - TAP SWITCH
TAP
-> bypass / engage
HOLD
(when bypassed) for > 500 ms
-> engages momentarily
HOLD
(when engaged) for > 500 ms
-> start parameter ramping.
TAP
-> change preset (A <-> B)
HOLD
for 1 second
-> enter tap-tempo mode: when
tempo LED stops blinking you may tap
in the new tempo*.
* Tap-tempo is applicable only in
Step Filter
mode.
ROSSIE
FILTER
ENGAGE / RAMP SWITCH
2. Footswitches and LEDs
