Revolving door TSA 325 NT
5
Tools and aids
à
Attach safety stickers to glass door leaves (Mat. no. 136518).
à
Danger of injury with opened drive. Hair, clothing, cables, etc. can be drawn in by rotating parts.
à
Danger of injury caused by unsecured crushing, impact, drawing-in or shearing spots!
à
Danger of injury due to broken glass!
à
Danger of injury due to sharp edges in the drive!
à
Danger of injury during installation through freely moving parts!
à
Use ladders or suitable protective equipment when working at height!
Working on the air curtain
à
Use suitable lifting tools when installing the air curtain.
à
The air curtain must be connected by a specialist company.
à
When working on the air curtain, watch out for sharp edges and elevated temperatures. Observe and comply
with the manufacturer's specifications.
1.4 Inspection of the installed system
Measures for protection and prevention of pinching, impact, shearing or drawing-in spots:
X
Complete the check points according to the check list in the document “Commissioning and service”.
X
Check the function of safety sensors and movement detectors.
X
Check protective earth connection to all metal parts that can be touched.
1.5 Environmentally conscious working
à
When disposing of the door system, separate the different materials and have them recycled.
à
Do not dispose of batteries and rechargeable batteries with household waste.
à
Comply with the statutory regulations when disposing of the door system and the batteries/storage cells.
à
Dispose of silicone residue according to local official regulations.
2
Tools and aids
2.1 General tool set
à
Tape measure
à
Torx wrench T x 20
à
Marking pen
à
Side-cutting pliers
à
Torque spanner
à
Crimping pliers for cables
à
Allen key in common sizes - including 7 mm
à
Electric drill
à
Open-ended wrench in common sizes
à
Mitre saw
à
Screwdriver set
à
Level
à
Personal protective equipment (PPE)
à
Protective glasses
à
Safety shoes min. class 3
à
Cut protection work gloves level 3
à
Helmet
à
Suitable work clothing
à
Ladder or protective scaffolding
2.2 Special tools
Tool
Size/remark
GEZEconnects
Diagnostic device GEZE ST220
Ring force gauge
Hammer drill
Welding equipment
Cordless screwdriver
Threader for M4–M8
and corresponding drills
Specialised tool: combination spanner,
angled, size 13 mm
ID no. 86838
Glass suction device
for curved glass surfaces
Tension belts
4 piece with sufficient length (
4–5
m)
