GEZE TSA 160 NT F, Wiring Diagram

Page: 59 / 64

TSA 160 NT
59
Fault messages
25 Fault messages
25.1 Fault display
On the DPS
à
Currently queued fault messages are displayed on the display programme switch in cycles (10 s). In addition,
they are also entered in the
e®
and
O e
fault memories.
à
The mode of operation is displayed for 5 s, the respective error message for 2 s.
à
Individual faults are indicated by the fault ID.
à
In addition, the following state is indicated:
à
Maintenance: Winter LED flashes continuously (0.5 s on, 0.5 s off)
On the control unit ST220
à
Faults are shown using the text form of the fault names.
Fault example: SIS SF
At the service LEDs
LED 5 flashes quickly (10 times per second). LEDs 1 to 4 display the fault number in binary form.
à
Passive leaf faults are displayed on the active leaf as fault 11 (collective fault SF).
25.2 Fault messages service LEDs, DPS, ST220
Single drive or GF
DPS Service-LEDs Fault message ST220 Fault description
5 4 3 2 1
01 *
○ ○ ○ ●
Motortriac Motortriac defective
0 2
*
○ ○ ● ○
Motor relay Motor relay defective
0 3
* ○ ○ ● ●
SIS defective Testing SIS faulty or permanent activation
0 4 *
○ ● ○ ○
SIO defective Testing SIO faulty or permanent activation
0 5 *
○ ● ○ ●
– Not used
0 6 *
○ ● ● ○
MPS Fault mechanical programme switch MPS
07
*
○ ● ● ●
Control
RAM test
EEPROM comparison
Motor test
CRC1
CRC2
24V fault surge voltage
internal control fault
0 8 *
● ○ ○ ○
Communication incorrect communication active leaf - passive leaf
0 9
*
● ○ ○ ●
Wall blanking Cam-operated switch of wall blanking is defective
1 0
* ● ○ ● ○
Motor voltage Fault during measurement of the motor voltage
11 *
● ○ ● ●
Collective fault SF Display at the LED interface of the active leaf that
the passive leaf has a fault.
(The fault is not displayed on the DPS. The fault is
not written into the “oE” either).
2 2 GF faulty solenoid valve
3 2
Sabotage If contact is interrupted, KB is not evaluated in night
mode of operation.
4 2 Emergency lock Emergency lock has tripped (only on GF control)
Activation active Sub-fault of
emergency lock
Push button defective
○ LED off
●
LED on
*
LED flashes rapidly (10 times per second)