GEZE TSA 160 NT F, Wiring Diagram

Page: 44 / 64

TSA 160 NT
44
Mode of operation
22 Mode of operation
LED 1 to LED 4 are used to display the set operating mode.
5 4 3 2 1 Mode of operation
○ ○ ○ ○ ●
OFF
○ ○ ○ ● ○
Night mode
○ ○ ● ○ ○
Exit only
○ ● ○ ○ ○
Automatic 1-leaf (AU Winter)
○ ○ ○ ● ●
Hold open
○ ● ● ○ ○
Automatic 2-leaf (AU Summer)
23 Service menu
23.1 Service terminal ST220
à Service terminal ST200, mat. no. 087261
à
The drive can be commissioned with service terminal ST220, software version from v2.1.
23.2 Operation of ST220
Key Function
Cursor upwards
Increase number value
Scroll upward (if key is pressed longer than 2 s)
Cursor downwards
Decrease number value
Scroll downward (if key is pressed longer than 2 s)
Cancel input
Any input can be cancelled by pressing the x key. The
input position then changes to the first menu position or
one menu level back.
Select
Update display
Accept new value
Display directly after connection
G E Z E
Service terminal
2.1
XXXXXYWWJJZZZZZZV
Software version ST220 V2.1
Serial number ST220
23.3 Service mode ST220
à The system changes to Service mode when the service terminal is connected to the DCU5.
à
Service is possible in modes of operation LS, AU and DO.
à
In Service mode, the door remains in operation in the current operating mode.
Display after connection establishment for door control
TSA160 NT 3.1 D0
DCU500 xy
Automatic
closed
Drive type Software version 3.0 Hardware version E1
“xy”: “GF” for active leaf, “SF” for passive leaf
Mode of operation
Door mode
X
Only exit the Service menu on the start screen, otherwise the parameter settings will not be saved.