GEZE Slimdrive SLT, Installation And Service Instructions Manual, Page: 34 / 36

Slimdrive SLT product family
34
Inspection of the installed door system
10 Inspection of the installed door system
10.1 Measures to prevent and secure hazardous areas
X
Check protective earth connection to all metal parts that can be touched.
X
Perform a safety analysis (risk analysis).
X
Check the function of safety sensors and movement detectors.
10.2 Installation checklist Slimdrive SLT
no. Test in On page Completed
1 All cables laid correctly for the installation of the Slimdrive SLT? – –
2 Track mounted? 5.2 8
3 Angled floor guide/continuous floor guide installed? 5.3 11
4 Moving leaf installed? 5.4 12
5 Drive components installed? 5.5 19
6 Tooth belt mounted? 5.5 19
7 Tooth belt locking mechanism (optional) and control unit connected? – –
8 Safety devices mounted? 6.4 29
9 Switches/push buttons installed and correctly connected? 6.5 29
10 Programme switch installed? 6.5 29
11 Transformer ground fitted? 5.8 23
12 Ground connection established? 6.3.1 26
13 230/115 V connection established? 6.1 24
14 Cover earthing connected? 6.3.1 26
15 Supports for cover installed? – –
16 Cover safety ropes fitted? – –
17 Safety analysis carried out? – –
18 Deviations of the door system checked in accordance with safety analysis? – –
19 Are all components mounted in accordance with the following
instructions:
– –
20
à
Pre-installation instructions Slimdrive SLT – –
21
à
Installation instructions SLT – girder section and side panel – –
22 à Pre-installation instructions profile system leaves and side panel – –
23
à
Installation instructions protective leaf for sliding door drives – –
24
à
Installation instructions safety leaf – –
25 Was the type plate for the Slimdrive SLT adhered instead of the type
plate for the Slimdrive SL?
9 33
26 Type plate added to the sliding door system?
Notes:
à Only relevant for Germany and within the scope of validity of
DIN 18650
à
The type plate may only be attached to the sliding door system if
assembly was also checked for correct completion according to the
GEZE specifications using the check list.
9 33