GEZE Powerturn, Installation And Service Instructions Manual

Page: 40 / 56

Powerturn
40
Electrical connection
8 Electrical connection
A safety analysis must be carried out and safety sensors installed if necessary (see Powerturn wiring diagram).
8.1 Mains connection
WARNING!
Risk of fatal injury due to electric shock!
X
The electrical system (230 V) may only be connected and disconnected by a professional electrician.
X
Carry out the power connection and protective earth connection test in accordance with applicable guidelines.
X
Before working on the electrical system, always disconnect the system from the mains.
X
Heed the wiring diagram.
à
In accordance with the valid regulations it must be possible to de-energise the drive unit at a suitable point.
X
De-energise the drive unit at the main switch in the control casing.
à See the wiring diagram for further details.