GEZE Powerturn, Installation And Service Instructions Manual

Page: 29 / 56

Powerturn
29
Installation
X
Use a screwdriver to remove the connector
panel (7) incl. housing, and detach it in the
direction of the arrow.
The 230 V terminal (8) is now accessible and
can be connected.
X
Then mount all parts again in reverse order. Make sure that the ribbon cables have been laid properly again.
7.7 Establishing electrical plug-in connections
X
Connect the sensor cables and control cables (1)
to the enclosed connectors (2) as per the wiring
diagram.
1
2
To simplify the installation process, the connectors (2)
can be attached in the position shown (3).