Powerdrive PL-HT KIT
5
Fundamental safety precautions
The product should be installed or incorporated in such a way that effortless access to the product is guaranteed
during any repairs and/or maintenance, and that any removal costs do not stand out of economic proportion to
the value of the product.
2.3 Safety-conscious working
à
Secure workplace against unauthorised entry.
à
Only use the cables prescribed in the cable plan provided. Cables must be shielded in compliance with the
wiring diagram.
à
Secure loose, internal drive cables with cable ties.
à
Before working on the electrical system:
à
Disconnect the drive from the 230/115 V mains and secure it against being switched back on again. Check
isolation from power supply.
à
Disconnect the control unit from the 24-V rechargeable battery.
à
When an Uninterruptible Power Supply (UPS) is used, the system will still be under voltage even when discon-
nected from the mains.
à
Always use insulated wire-end ferrules for wire cores.
à
Danger of injury with opened drive. Hair, clothing, cables, etc. can be drawn in by rotating parts!
à
Danger of injury caused by unsecured crushing, impact, drawing-in or shearing spots!
à
Danger of injury due to sharp edges on the drive!
à
Danger of injury during installation through freely moving parts!
2.4 Environmentally conscious working
à
When disposing of the door system, separate the different materials and have them recycled.
à
Do not dispose of batteries and rechargeable batteries with household waste.
2.5 Safety instructions related to transportation and storage
X
Do not throw, do not drop product and product components.
X
Avoid heavy blows.
à
Storage temperatures under –30 °C and above +60 °C can result in damage to the product.
à
Protect the product against humidity.
à
Dry, well ventilated, closed, weather-proof and UV-protected rooms are suitable as storage areas.
2.6 Qualification
Installation of the GEZE sliding door drive may only be carried out by experts authorised by GEZE.
