Powerdrive PL-HT KIT
4
Fundamental safety precautions
2
Fundamental safety precautions
X
Please also note the fundamental safety precautions in the installation instructions for the Powerdrive PL-HT
sliding door system.
2.1 Intended use
The Powerdrive PL-HT sliding door system is suitable for the construction of an automatic sliding door system
that is designed for use in the medical field and in areas with high hygienic requirements.
The completely assembled and tested Powerdrive PL-HT drive unit must be assembled and put into operation in
accordance with the pre-installation instructions for the Powerdrive PL-HT sliding door system.
The sliding door system is used for the automatic opening and closing of a building passage.
The sliding door system may only be used in a vertical installation position and in dry rooms within the permit-
ted application area (see installation and service instructions).
The sliding door system is designed for pedestrian traffic in buildings.
The sliding door system is not designed for the following uses:
à
for industrial use
à
for areas of application which do not serve pedestrian traffic (such as garage doors)
à
on mobile objects such as ships
The sliding door system may only be used:
à
in the modes of operation provided for by GEZE
à
with the components approved / released by GEZE
à
with the software delivered by GEZE
à
in the installation variants / types of installation documented by GEZE
à
within the tested/approved area of application (climate / temperature / IP rating)
Any other use is considered non-intended and will lead to the exclusion of all liability and warranty claims to GEZE.
2.2 Safety notices
à
Intervention and modifications which influence the safety technology and functionality of the door system
may only be carried out by GEZE.
à
Problem-free and safe operation assumes proper transportation, proper set-up and installation, qualified
operation and correct maintenance have taken place.
à
The relevant accident prevention regulations and other generally recognised safety-related or health & safety
rules must be kept.
à
Only original accessories, original spare parts and accessories approved by GEZE guarantee problem-free
function of the door system.
à
The mandatory installation, maintenance and repair work must be performed by properly trained personnel
authorised by GEZE.
à
The country-specific laws and regulations are to be observed during safety-related tests.
à
GEZE is not liable for any injuries or damage whatsoever resulting from unauthorised changes to the system.
à
GEZE does not accept any warranty for combinations with third-party products.
à
Furthermore, only original GEZE parts may be used for repair and maintenance work.
à
The connection to the mains voltage must be made by a professional electrician. Perform the power connec-
tion and equipment earth conductor test in accordance with VDE 0100 Part 610.
à
Use an on-site 10-A overload cut-out as the line-side disconnecting device.
à
Protect the display programme switch against unauthorised access.
à
In compliance with Machinery Directive 2006/42/EC, a risk analysis must be performed and the door system
identified in accordance with CE Marking Directive 93/68/EEC before the door system is commissioned.
à
Observe the latest versions of directives, standards and country-specific regulations, in particular:
à
DIN 18650: 2010-06 “Building hardware– Powered pedestrian doors”
à
VDE 0100, Part 610: 2004-04 "Installing Electrical Power Systems with Nominal Voltages up to 1000 V"
à
DIN EN 16005: 2013-01 "Power operated pedestrian doorsets; safety in use; Requirements and test methods"
à
DIN EN 60335-1: 2012-10 “Safety of electrical devices for home use and similar purposes - Part 1: General
requirements (IEC 60335-1: 2010, modified), German version EN 60335-1: 2012
à
DIN EN 60335-2-103: 2016-05 “Safety of electrical devices for home use and similar purposes - Part 2-103:
Special requirements for drives for gates, doors and windows. (IEC 60335-2-103: 2006, mo A1: 2010,
modified), German version EN 60335-2-103: 2015
