Powerdrive PL-HT KIT
11
Pre-installation
5.6 Connecting transformer and control unit
X
Make sure that cables are routed and secured in such a way that they do not become jammed when the cover
is positioned and cannot come into contact with moving components.
X
Cut the transformer cable (1) from the transformer to the control unit (3) to size.
X
Fit wire-end ferrules to the transformer cable (1).
X
Note earthing connection!
X
Do not mix up wires!
X
If necessary, shorten and strip cable (1), attach insulated wire-end ferrules and connect to the connector (2)
(see wiring diagram).
X
Connect the connector (2) to the control unit (3).
5.7 Connecting drive motor and control unit
X
Route the rotary transducer cable (2) and motor connection cable (1) to the control unit (3).
X
Insert the connector into the control unit (3).
