Powerdrive PL-HT KIT
6
About this document
3
About this document
These instructions describe the pre-installation of the Powerdrive PL-HT automatic sliding door drive.
4
Overview
4.1 Diagrams
Drawing no.
Type
Designation
70722-9-0950
Drive drawing
Powerdrive PL-HT drive
70506-2-0263
Production drawing
Track made to measure for Powerdrive PL-HT
70722-2-0250
Production drawing
Carrier made to measure for PL-HT
70722-2-0207
Production drawing
Ramp for left hand slide to open made to
measure for PL-HT
70722-2-0208
Production drawing
Ramp for right hand slide to open made to
measure for PL-HT
70722-1-0119
Production drawing
HPL/ wooden leaf mounted PL-HT
70722-2-0215
Production drawing
Frame right / left / top
70722-2-0218
Production drawing
Frame right / left / top
70722-2-0229
Production drawing
Floor guide profile
70722-2-0235
Component drawing
Suspension profile leaf PL-HT
70722-2-0253
Component drawing
Suspension profile leaf HPL/WOOD PL-HT
70722-2-0237
Production drawing
Frame right with floor guide
70722-2-0238
Production drawing
Frame left with floor guide
70723-2-0239
Production drawing
Floor guide profile right
707023-2-0240
Production drawing
Floor guide profile left
707023-2-0250
Production drawing
Carrier made to measure
70722-2-0252
Production drawing
Wooden leaf PL-HT
70722-2-0255
Production drawing
Seal silicone profile PL-HT made to measure
The diagrams are subject to change without notice. Use only the most recent version.
4.2 Tools and aids
Tool
Size
Tape measure
Marking pen
Torque spanner
Allen key
2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
Open-ended spanner
8 mm, 10 mm, 13 mm, 15 mm
Screwdriver set
Slot up to 6 mm
Side-cutting pliers
Crimping pliers for cables
Wire stripper
Multimeter
Display programme switch DCU1/Service terminal ST220/GEZEconnects
4.3 Torques
The torques are given at the respective installation step.
