IQ lock AUT, EL / EL DL, EM / EM DL, C / C DL, M / M DL
20
Installation
4.5 Rod drive IQ AUT
4.5.1 Preparing the door leaves
Requirement
In order to protect the lock components from falling chips when machining the passive leaf:
X
Remove the strike box as well as the round bar top and bottom.
Recess passive leaf
Note the following for the recess of the passive leaf:
à
Type of door (tubular frame or solid leaf)
à
Use the dimensions and drill spacing shown below in accordance with the type of door.
à
Recess dimensions for the flat face plate width on solid leaf.
à
Cable routing must be designated for the rod drive IQ AUT.
1
Recess for type of door: Tubular frame (short strike box)
2
Recess for type of door: Tubular frame (long strike box)