ECdrive H
4
Fundamental safety notes
2
Fundamental safety notes
GEZE GmbH is referred to as GEZE below.
2.1 Intended use
The sliding door system is used for the automatic opening and closing of a building passage.
The sliding door system may only be used in a vertical installation position and in dry rooms within the permitted
application area.
The sliding door system is designed for pedestrian traffic in buildings.
The sliding door system is not designed for the following uses:
à
for industrial use
à
for area of application which do not serve pedestrian traffic (such as garage doors)
à
on mobile objects such as ships
The sliding door system may only be used:
à
in the modes of operation provided for by GEZE
à
with the components approved/released by GEZE
à
with the software delivered by GEZE
à
in the installation variants / types of installation documented by GEZE
à
within the tested/approved area of application (climate / temperature / IP rating)
Any other use is considered non-intended and will lead to the exclusion of all liability and warranty claims to GEZE.
2.2 Safety notes
à
Intervention and modifications which influence the safety technology and functionality of the sliding door
system may only be carried out by GEZE.
à
Problem-free and safe operation assumes proper transportation, proper set-up and installation, qualified
operation and correct maintenance have taken place.
à
The relevant accident prevention regulations and other generally recognised safety technology or health &
safety rules must be kept.
à
Only original accessories, original spare parts and accessories approved by GEZE guarantee problem-free
function of the sliding door system
à
The mandatory installation, maintenance and repair work must be performed by properly trained personnel
authorised by GEZE.
à
The country-specific laws and regulations are to be observed during safety-related tests.
à
If unauthorised changes are made to the system, GEZE cannot be held liable in any way whatsoever for any
resulting damage, and the statement of approval for use in escape and rescue routes is no longer valid.
à
GEZE does not accept any warranty for combinations with third-party products.
à
Only original GEZE parts may be used for repair and maintenance work.
à
The connection to the mains voltage must be completed by an electrician or specialised electrical technician.
Perform the power connection and protective earth connection test in accordance with VDE 0100 Part 600.
à
Use an on-site 10-A overload cut-out as the line-side disconnecting device.
à
Protect the display programme switch against unauthorised access.
à
In compliance with Machinery Directive 2006/42/EC, a risk analysis must be performed and the door system
identified in accordance with CE Marking Directive 93/68/EEC before the door system is commissioned.
à
Observe the latest versions of guidelines, standards and country-specific regulations, in particular:
à
DIN 18650: “Building hardware – Powered automatic doors”
à
VDE 0100, Part 600: “Installation of low-voltage systems”
à
EN 16005: “Power-operated pedestrian doorsets – Safety in use– Requirements and test methods”
à
EN 60335-1: “Household and similar electrical appliances - Safety Part 1: General requirements”
à
EN 60335-2-103: “Household and similar electrical appliances - Safety: Special requirements for drives for
gates, doors and windows”
à
Do not loosen screw-fitted electrical ground connections.
The product should be installed or incorporated in such a way that effortless access to the product is guaranteed
during any repairs and/or maintenance, and that any removal costs do not stand out of proportion to the value
of the product.
