ECdrive H KIT
9
Pre-installation
5.3 Installing stop buffers
Stop buffer: Pos. 13 in assembly group list, Chapter 4.4
X
Set stop buffers on the track on the left and
right (1).
X
Screw in the setscrews M6×6 (2) until they are in
contact with the track.
Do
not
tighten the setscrews.
The exact position of the stop buffers (1) is speci-
fied during door leaf installation.
5.3.1 Installing the side plates
X
Screw the side plates (2) to the track using the
screws (1) (torque 5 Nm).
X
Screw the safety block (4) to the inside of the side
plate (2) using the screws (3).
X
Screw the bolt (5) completely into the safety block
(4) from below.