G5 – Owner‘s Manual | 29
10.1.1.4
A
TTACK
T
IME
Change the "attack" of the drum by setting a low value for a direct and tight attack sound and a
high value for a rather soft attack sound. This way, in the case of a snare, you can also simulate
different snare wire tensions.
10.1.1.5
R
ELEASE
T
IME
Controls the length of the sustain (decay). In this way, the dampening of an instrument can be
simulated. The natural sustain of the DRY sample (without effects) shortens in low dial positions and
sounds longer in high dial positions.
10.1.1
FX
S
END
INSTRUMENT
[F1]
[F1]
FX Send
The Ambient
[AMB], Instrument Reverb [I-REV],
Room Reverb [R-REV]
and
Multi Effects [MFX]
controls allow you to mix the individual effects.
The effect is only applied to the selected input.
The global change can be found under
[MIX].
Use the dial
[5] [<SELECT>]
or the navigation keys
[8]
to select the effect to be applied to your drum
sound. The fader channel is displayed inverted.
Use the dial
[7] [<VALUE>]
or the navigation keys
[8]
to change the strength of the effect.
If you want to apply the effects to other drum
sounds in this menu, use the dial
[6] [<INPUT>]
to
switch the different input channels and compo-
nents.
Press
[F3]
to exit the level or any menu key to
exit the entire menu.
As soon as you make changes to the settings that are not automatically saved, a
[*]
is
displayed next to the corresponding name to indicate this. Save your changes accordingly
before (!) changing the drum kit preset. Unsaved settings will otherwise be discarded.
Summary of Contents for G5
Page 32: ......
Page 147: ...G5 Owner s Manual 133 376Ch Tap Head Rim 2nd MIDI note 0 not used 0 ...
