Full HD Multi-Streams Ultra-WDR Box IP Camera G-Cam/EBC-3140 Quick Guide
2
3
This guide is for quick installing and connecting the Full HD Multi-Streams Ultra-WDR Box IP Camera. For more details,
please refer to the User’s Manual of the camera in the supplied CD.
Camera‘s Connectors
DC 12V/ AC 24V/ PoE
No.
Connector
Definition
1
Audio I/O
Two-way audio transmission
2
Power LED
For power connection indication (green light)
3
Default Button
Press the button with a proper tool for at least 20 seconds to restore the system.
4
Auto Iris
For auto iris lens connection
5
PoE Network
For network and PoE connections
6
Network LEDs
For network connection and activity indication
7
Alarm I/O *
1
Alarm Out +
5
GND
2
Alarm Out –
6
D −
3
Alarm In +
7
D +
4
Alarm In –
8
BNC
For analog video output (stream dependent)
9
microSD Card Slot
Insert the microSD card into the card slot to store videos and snapshots. Do
not remove the microSD card when the camera is powered on.
10
Power (DC12V / AC 24V)
+
DC 12V
AC 24V ~
(GND)
−
DC 12V GND
AC 24V ~
*Do
NOT
connect external power supply to the alarm I/O connector of the camera.
NOTE:
It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to
support long term continuous data read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and the life expectancy.
Mounting C/CS Mount Lens
Follow the instructions below to mount the C/CS Mount Lens to the camera.
•
Remove the plastic cover from the camera.
•
Mount the C/CS Mount Adapter to the camera.
•
Attach the lens to the adapter.
Camera Cabling
Please follow the instructions below for cable connections.
Power Connection
Please use a DC 12V / AC 24V power adaptor and plug it to the power connector of camera and the power outlet.
Alternatively, users can use an Ethernet cable and connect it to the RJ-45 connector of the camera and a Power
Sourcing Equipment (PSE) switch.
NOTE:
If PoE is used, make sure PSE is in use in the network.
Ethernet Cable Connection
Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to
the network switch or PC.
NOTE:
In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the
PC.
NOTE:
Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, please check
the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
Before Login to the Camera
A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the
camera, please ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and plug-
ins or setting Internet’s security level to default. For further details, please refer to the User’s Manual in the supplied
CD.
ActiveX Controls and Plug-ins Settings
Internet Security Level
Step 1:
Start the Internet Explorer (IE).
Step 2:
Select <Tools> from the main menu of the
browser. Then click on <Internet Options>.
Step 3:
Click on the <Security> tab and select
<Internet>, and click on <Custom level> to
change ActiveX settings.
Step 4:
Set “ActiveX controls and plug-ins” items to
<Prompt> or <Enable>.
Step 1:
Start the Internet Explorer (IE).
Step 2:
Select <Tools> from the main menu of the
browser. Then click on <Internet Options>.
Step 3:
Click on the <Security> tab and select
<Internet>.
Step 4:
Down the page, click <Default Level> and click
on <OK> to confirm the setting. Close the
browser window, and open a new one later for
accessing the IP camera.
Camera Login
The default configuration is
DHCP
. If no DHCP server is in network, the camera sets itself to its default IP address
192.168.0.250
. You find the camera via the
Device Searching Tool
(on the CD). Therefore, to access the camera for
the first time, please set the IP address of the PC as: 192.168.0.XXX; for example:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Login ID and Password
•
Key in the camera’s IP address in the URL bar of the web browser window and hit on “Enter”.
•
Enter the default username (
root
) and password (
admin
) in the prompt request dialogue. Note that username is
case sensitive.
Install the ActiveX Control
•
After connecting to the camera, the request for installing the ActiveX control will appear just below the URL bar.
•
Right click on the information bar, and then click on <Install ActiveX Control…> to permit ActiveX control installation.
•
In the pop-up security warning window, click on <Install> to start downloading the DCViewer software on the PC.
