Installation and commissioning
14
V 1.0
Do not connect a cable shield to a ground connection (pin).
Keep the twisted part of the cable shield in the plug (socket) for as little time as
possible.
Turning on the device
Before turning the unit on, please observe the following safety information
.
Use a socket with a protective contact to connect the power supply unit.
Ensure a power supply between 110 VAC and 230 VAC.
Please do not press any keys whilst powering up!
The operating system is
precisely pre-configured for your device. By pressing a key during powering up,
this configuration could be adversely affected.
Proceed as follows to switch on the device:
1.
Connect the device to the power supply.
2.
The device has been switched on.
3.
Wait for the operating system to boot. During this operation, the client and the
database of the device are started automatically
.
4.
Use the key combination
Ctrl + Alt + Del
under
MS Windows an.
Enter the following in the
Windows registration
dialog field:
Username:
Administrator
Password:
Pa$$w0rd
The
administrator
user profile allows full access to your G-ST
.
Confirm using the “ENTER” key.
You are now at operating system level.
First, set your language.