<D
oc
_U
SR
><
D
oc
_5
02
40
43
00
><
R
el
_A
><
L
an
g_
G
B
>
Page 4 of 4
SAFETY REGULATIONS
This machine has been designed with a number of built-in safety devices. To avoid in
-
jury, it is highly important not to bypass or disable these safety devices. If the equipment
is used in a manner not specified by the manufacturer this can impair the safety equip
-
ment on the machine.
The equipment must be used in accordance with the safety instructions be-
low. If in doubt, contact a representative of the reseller without delay.
Important
Read the instructions thoroughly before use.
The equipment must only be used by personnel who know about it and are trained
to use it. Personnel must also receive regular training on this equipment.
Take care when handling the chemical agent used in the machine.
Read the details on the container or contact the manufacturer:
Read the details on the container or contact the manufacturer:
- if the agent comes into contact with the operator’s eyes or skin or if the vapors are
breathed in, etc.
- about storing the agent and disposing of empty containers.
Take care, because the machine uses hot water and possibly steam.
Installation and service work must be done by personnel trained in the use of
this machine.
Never bypass the door switch of the machine.
Leakage in the system, due to a worn door seal for example, must be dealt
with immediately.
The electric power must be cut off before the machine cabinet is opened. (The ma-
chine cabinet contains electrical components).
Make sure that there is always detergent in the bottles. This is important both for the
operation of the machine and for keeping the washing chamber free from staining.
The machine must be kept clean if it is to work properly.
Do not wash down or hose down the machine with water.
The machine must not be operated with cladding plates, roof and plinths removed.
Doing this puts at risk the safety and functioning of the machine.
Spare parts may only be obtained from Getinge EDC.
Product liability
Any modification or incorrect use of the equipment without the approval of Getinge Dis
-
infection AB invalidates Getinge Disinfection AB’s product liability.
This product was manufactured by:
GETINGE DISINFECTION AB
Ljungadalsgatan 11, Box 1505
351 15 Växjö, Sweden
Isolator switch
The machine must be fitted with a separate, lockable isolating device in the electric pow
-
er supply. The isolating device must be easily accessible on a wall close to the machine.
The installation must conform to and be marked in accordance with local provisions.
In an emergency
Switch off the main switch
Close stopcocks in the water and (where present) steam supply lines.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•