Control Elements, Putting into Operation
20
PhysioMem
®
PM 100 2G
77811011
Fig. 4.
Back of the recorder with electrodes
4.2
Putting into Operation, Fully Charging the Battery
NOTE
If the ambient temperature is lower than 0 °C, the device should not
be charged.
The device has a built-in rechargeable battery, which is charged by
inductive coupling with the Wireless Charging Transmitter Pad
(charging pad).
Before first use of the device, the battery has to be fully charged.
Use the USB cable to connect the included charging pad (Fig. 5) to
the power supply plug and connect this to the mains supply. Then
place the device on the charging pad.
