Getac MH132 User Manual Download Page 77

Page: 77 / 107

More Programs

6-3

The message

appears on the screen for a few seconds, meaning

the picture is saved to the predefined storage location.

NOTE:

Always wait for the saving procedure to complete before giving the next

command.

If you want to view the picture, tap the

button.

Status Bar and GPS Information

The status indicators are described below:

Indicators

Descriptions

Number of pictures already taken / Total number of pictures
allowed.

NOTE:



Total number of pictures allows varies with the picture size
setting.



Maximum number shown is 999 even if the storage capacity
allows for more.

Pictures saved to:



The device’s

My Documents/My Pictures

folder



Storage card

/ /

White balance mode:



Automatic



Sunshine

Summary of Contents for MH132












































































































Search results

Summary of Contents for MH132

Reviews:

Related manuals for MH132

Brands by name

Popular brands

Getac MH132, User Manual

Search results

Summary of Contents for MH132

Reviews:

Related manuals for MH132

Brands by name

Popular brands