42
Replacing the Battery Pack
CAUTION:
There is danger of explosion if the battery is incorrectly replaced. Replace
the battery only with the computer manufacturer’s optional battery packs.
Discard used batteries according to the dealer’s instructions.
Do not attempt to disassemble the battery pack.
NOTE:
The illustrations show the Standard model as the example. The removal
and installation method for the Expansion model is the same.
1.
Turn off the computer and disconnect the AC adapter.
Skip this step if you are hot swapping the battery pack.
2.
Carefully place the computer upside down.
3.
Locate the battery pack you want to remove (
or
).
4.
Slide the battery latch toward the right (
) and then upwards (
) to
release the battery pack.
5.
Remove the battery pack from its compartment.
6.
Fit another battery pack into place. With the battery pack correctly
oriented, attach its connector side to the battery compartment at an
angle (
) and then press down the other side (
).
