Getac B360 User Manual Download

Page: 41 / 111

Using the RFID Reader (Optional)

Select models have an HF RFID reader. The reader can read data from HF
(High Frequency) RFID (Radio Frequency Identification) tags.

The RFID reader is enabled by default. To enable or disable the reader, run
the BIOS Setup program and select

Advanced



Device Configuration



RFID Card Reader

. (See Chapter 5 for information on BIOS Setup.)

For optimal results when reading an RFID tag, have the tag face the antenna
in the same orientation as indicated by the icon on the exterior of the Tablet
PC. The icon

indicates where the RFID antenna is located.

NOTE:



When not using an RFID card, do not leave it within or near the antenna

area.



For enhanced applications and customization of the module, contact your

authorized Getac dealer.

RFID antenna

Summary of Contents for B360
















































































































Search results

Summary of Contents for B360

Reviews:

Related manuals for B360

Brands by name

Popular brands

Getac B360, User Manual

Search results

Summary of Contents for B360

Reviews:

Related manuals for B360

Brands by name

Popular brands