Getac B360 User Manual Download

Page: 35 / 111

Connecting to another Bluetooth Device

Make sure that the Bluetooth function is enabled (as described above).

Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)

Click



Settings



Devices



Bluetooth

Select the device you want to connect from the search results.

Depending on the type of Bluetooth device that you want to connect
to, you will need to enter the pertinent information.

For detailed information on using the Bluetooth feature, see Windows’
online Help

Using the WWAN Feature (Optional)

A WWAN (Wireless Wide Area Network) uses mobile telecommunication

cellular network technologies to transfer data. The WWAN module of your
computer supports 3G and 4G LTE.

NOTE:

Your model only supports data transmission; voice transmission is not

supported.

Installing a SIM Card

Turn off the computer and disconnect the AC adapter.

Open the cover of the SIM card slot.

Remove one screw to detach the small metal plate that covers the SIM
card slot.

Summary of Contents for B360
















































































































Search results

Summary of Contents for B360

Reviews:

Related manuals for B360

Brands by name

Popular brands

Getac B360, User Manual

Search results

Summary of Contents for B360

Reviews:

Related manuals for B360

Brands by name

Popular brands