CLEANING THE HEATER
1)
Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
2)
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth. Do not
use any detergents or abrasives and do not allow any water to enter the heater
.
STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust and stored in a clean
dry place.
NOTE
This product should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority for recycling advice.
GET Plc., Key Point, 3 – 17, High Street, Potters Bar, Herts. EN6 5AJ
Helpline Telephone No. 0121 565 7770
AR1160 Ed.A
INSTRUCTIONS FOR GET HALOGEN HEATER
Model covered by this instruction sheet:- G4HAL - 1.6kW Oscillating Halogen Heater.
IMPORTANT
Read these instructions fully before using the heater. Retain these instructions
for future reference
.
NOTE:- THESE HEATERS ARE INTENDED FOR DOMESTIC USE ONLY.
SAFETY INSTRUCTIONS (to be read before operating the heater)
1)
Do not look at the heating lamps for prolonged periods as this may cause irritation or
damage to the eyes and should be avoided.
2)
Do not cover the heater or obstruct the grilles.
3)
Young children or infirm persons must not use the heater without supervision.
4)
The heater is not intended for use in bathrooms, laundry areas or similar indoor locations.
Never place the heater where it may fall into a bathtub or other water container.
5)
Do not use outdoors.
6)
Do not place the heater on carpets having a very deep pile.
7)
Always ensure that the heater is placed on a firm level surface. Ensure that the heater is
not positioned close to curtains, furniture or combustible materials as this could create a
fire hazard.
8)
Do not position the heater in front of, or immediately below, a wall socket.
9)
Do not insert objects into any opening on the heater as this may cause electric shock or
overheating.
10)
Do not use the heater in areas where flammable liquids are stored or where flammable
fumes may be present.
11)
Always unplug the heater when not in use or when moving it from one location to another.
12)
Do not operate or leave the heater running when it is un-attended.
13)
Do not use a time switch or other device that could switch the heater on automatically.
14)
Prevent water from getting into the unit including when it is in storage.
15)
Do not touch the housing or any of the outlet grilles as they become hot during operation.
16)
If the heater is damaged or faulty a qualified service engineer must repair it.
17)
Do not use the heater if the power cord is damaged. If the power cord is damaged it must
be replaced by a recognised service agent or other qualified person. If the plug is
damaged, see Plug Replacement details inside.
