Gestton EG-7240 User Manual Download Page 2

Safety instruc ons

When using this electronic device, basic precau ons should always be taken,
 including the following:

1

   Read all instruc ons before using the product.

2

   Do not use this product near water (e.g., near a bathtub, washbowl, kitchen 

sink, in a wet basement or near a swimming pool etc).

3

   Use this device when you are sure that the controller has a stable base and it is 

fixed securely.

4

   This product, in combina on with loudspeakers and amplifier may be capable 

of producing sound levels that could cause permanent hearing loss. Do not 
operate for a long period of  me at a high volume level or at a level that is 
uncomfortable. If you experience any hearing loss or ringing in the ears, you 
should consult with otorhinolaryngologists.

5

   The product should be located away from heat sources such as radiators, heat 

vents, or other devices that produce heat.

6

   The product should be connected to a power supply that is described in the 

opera ng instruc ons or are marked on the product.

7

   Before the wiring always unplug equipment’s from main power supply.

8

   The power supply should be undamaged and never share an outlet or extension 

cord with other devices. Never leave device plugged in the outlet when it is not 
being used for a long period of  me.

9

   Care should be taken that objects do not fall into liquids and liquids would not 

be spilled on the device.

10

 Do not block any ven la on openings. Install in accordance with the 

manufacturer’s instruc on.

USER MANUAL | EG-7240 Digital Wireless Conference System

Safety instruc ons

11

  Do not defeat the safety purpose of the polarized or grounding-type plug. A 

polarized plug has two blades with one wider than the other. A grounding-type 
plug has two blades and a third grounding prong. The wide blade or the third 
prong are provided for your safety. If the provide plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete outlet. 

12

  Protect the power cord from being walked on or pinched par cularly at plugs, 

convenience receptacles, and point where they exit from the apparatus. 

13

  Only use a achments/accessories specified by the manufacturer.

14

  Unplug this apparatus during lightning storms or when unused for long periods 

of  me.  

15

  The apparatus shall be connected to a main socket output with a protec ve 

earthing connec on. 

16

  The product should be serviced by qualified service personnel if :

 
       - The power supply or the plug has been damaged.
       - Objects have fallen into or liquid has been spilled on the product.
       - The product has been exposed to rain. 
       - The product has been dropped or the enclosure damaged. 
       - The display or main board damaged 

17

  There are some areas with high voltage inside, to reduce the risk of electric 

shock ,  do not remove cover of the controller or power supply. The cover 
should be removed by qualified personnel only. 

USER MANUAL | EG-7240 Digital Wireless Conference System

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

To reduce the risk of electric shock,do not remove screws,

No user-serviceable parts inside.Refer servicing to qualified

service personnel.To reduce the risk of fire,electric shock

or product damage,do not expose this apparatus to rain,

moisture,dripping or splashing and that no objects filled

with liquids,such as vases,shall be placed on the apparatus.

Summary of Contents for EG-7240















Reviews: