27
Putting the equipment out of operation
Removing the equipment
Switch off the data collector and Com box.
Remove the measuring transducer connecting
cable from the Com box socket outside of the
potentially explosive atmosphere.
If necessary, charge the data collector and Com
box outside of the potentially explosive
atmosphere.
Store the equipment as described on page 13.
Disposing of the equipment
The equipment is made from the following
materials:
Component
Material
Data collector
See data collector installation
& operating manual
Measuring
transducer body
3.7035
Com box housing ABS (acrylonitrile butadiene
styrene)
Identification signs 1.4301
Transport case
Aluminium/plywood/TCN
film/foam/cardboard
The equipment and its components contain
electronic parts that must be disposed of
separately.
Send the equipment with all components back
to the manufacturer.
