1. Delayed start - 30 seconds
2. Remote control – turn lamp on while you’re outside the room
3.
Motion sensor
– pauses lamp if motion is detected
While this may cause minor inconvenience, we feel your safety is worth it!
a. Detects motion 10ft away
b. Motion detector is located in the base. Do not block
c. Lamp will restore automatically 30 seconds after no motion is sensed and will resume
disinfection cycle. It does not start over
NOTE:
This motion sensor is highly sensitive (to movement). The lamp may not turn on
if it senses:
i. Trees blowing outside (close blinds)
ii. Ceiling fans (turn off)
iii. Things blowing from heat or AC (turn off)
iv. Shadows
INSTRUCTION GUIDE
100 watt UVC Room Sterilization Lamp
Sanitize Everything, Everywhere!
Please read all warnings and instructions before using this device. Save these
instructions. This product is intended for household use only.
SANITIZE EVERYTHING - EVERYWHERE!
What’s Included
UVC Bulb Disposal
The sealed bulb in this device contains
mercury. Do not dispose of used bulb in the
trash. Dispose of properly. For recycling
and proper disposal protocols consult your
local waste authority or visit www.epa.gov/cfl
100w UVC Lamp
(1)
Instructions
(1)
Remote Control
(1)
UVC Test Card
(1)
Specifications
UVC Bulb:
Wavelength:
Size:
Weight:
Model:
Power:
100w
110v
254nm NO OZONE
10”L x 8”W x 25”H
2.9 lbs
L100254
Disinfection Times
Safety Features
1- 430 Sq. ft.
430 - 645 Sq.ft.
645 - 860 Sq. ft.
860 - 1,075 Sq. ft.
Room Size
Time
15 minutes
30 minutes
60 minutes
120 minutes
© 2020 Germozap LLC
Seal Beach CA
All Rights Reserved
Made in China
EPA Co. No. 97721
Distributed by
EPA Est. No
97239-CHN-1
99.9% disinfection rate
confirmed by certified test lab
30’
60’
15’
30’
60’
15’
