Germfree LFGI-3USP, User Manual

Page: 29 / 85

failure of the product), regardless of cause or for breach of any written or implied warranty is
expressly disclaimed and excluded here from.
Your Rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. Some
states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you.
This warranty gives you specific rights, and you may have other rights which vary from state
to state or by jurisdiction.
Outside the United States
In countries other than the United States, the terms and conditions of this warranty may be
different. Unless specific GERMFREE warranty is communicated to the purchaser in
writing by a GERMFREE company, no warranty or liability exists beyond any minimum
requirements imposed by law, even though defect, damage, or loss may be by negligence or
other act.
Maintenance
Typical life span of a glove sleeve is 6 months and GERMFREE recommends that they be
changed at that interval. See the appendix “Glove/Sleeve change” for instruction.
Typical life span of a prefilter is 3 months but differing room conditions can require
replacement more or less frequently. During the first 3 months of operation the pre-filter
should be checked once per month to determine an average life span. Pre-filters should be
changed regularly thereafter.
Hydraulic lift system does not require any maintenance.
Regular certification will dictate life spans and replacement schedules of the supply, exhaust
and airlock HEPA filters. Regular replacement of the prefilter will lengthen the life of your
supply HEPA filter. The Minihelic Gauge is an indicator of differential pressure between
the blower inlet and the Supply HEPA filter. It is a qualitative indicator of the HEPA filter
condition. Your certifier should note the starting pressure and monitor it periodically. Large
changes in readings in a short time period is indicative of possible failures. Typical HEPA
filter life span is 3-5 years.
29