6
WARNING!
ELECTRICAL SAFETY AND POWER CORD HANDLING
•
Voltage:
Make sure that your outlet voltage and circuit frequency
correspond to the voltage stated on the appliance rating plate.
•
Power outlet:
Connect the appliance to a properly earthed power outlet,
which must be easily accessible so that you can unplug it if necessary.
•
Power cord:
Do not kink or damage the power cord. Do not let it hang over
the edge of a table or benchtop, and do not let it touch hot or sharp surfaces.
Make sure the cord does not run under the microwave oven.
•
Electrical safety:
Do not insert any objects into the appliance.
USAGE RESTICTIONS AND CONDITIONS
• This appliance is intended for indoor domestic use only. It is not suitable for
commercial, industrial or laboratory use.
• Do not use the appliance outdoors.
• The appliance is not intended to be operated by means of an external timer.
GENERAL SAFET (Cont.)
•
Disconnection:
Switch the appliance off and unplug it from the power
supply after you have finished using it and before cleaning, servicing,
maintenance, or moving the appliance. DO NOT pull the cord when
disconnecting, grip the plug and pull it gently out of the outlet.
•
Protect from moisture:
To reduce the risk of electrocution and other electrical
hazards, do not immerse the cord or plug in water, do not spill
liquids into the oven, and do not operate it with wet hands.
•
Damage:
Do not use this appliance if it has a damaged cord or plug, if it is not
working properly, or if it has been damaged or dropped. If damaged, please
contact our support centre line - [email protected]
•
Damaged cord:
If the appliance and/or its cord are damaged, it must be
replaced by the manufacturer, its service agent or a similarly qualified person
in order to avoid a hazard. Do not attempt to repair, disassemble, or
modify the appliance. There are no user-serviceable parts inside this unit.
Summary of Contents for GMW230AU8
Page 2: ......
Page 22: ...22 ...
Page 23: ...23 ...
Page 24: ...24 CUSTOMER HELPLINE info ayonz com DISTRIBUTED BY Ayonz Pty Ltd ...