USER MANUAL
Please read these instructions and warranty information
carefully before use and keep them handy for future reference.
SAFETY INSTRUCTIONS
1. Make sure the power adapter output voltage
is 5V/DC, standard power adapter, 5V/DC>1A.
2. Do not dismantle this product or immerse it
in water to avoid the occurrence of failures.
3. If product is dirty, wipe clean with wet
tissue or towel wetted with a few drops of
purified water. Do not pour water onto
product as it may damage the circuit board.
WARNING!
DO NOT look at UV-C LED directly when
the product is operating as it may be
damaging to your eyes.
OPERATING INSTRUCTIONS
To Charge
1. When charging with USB, the LED indicator
light will blink red, indicating the product is
charging. When fully charged (approx.2 hrs),
LED indicator light will light up constant in red.
2. When product is operating, the LED
indicator light will light up constant in blue.
PRODUCT STRUCTURE
To Use
1. Open cover. Place toothbrush head facing
the UV tube, and wedge toothbrush neck
into the silicone holder.
2. Close cover. Product will automatically start
to operate. Sanitization cycle will be
completed after 5 minutes, after which the
product will automatically turn off.
TECHNICAL SPECIFICATION
LED
Indicator Light
UV-C LED
Drain / Ventilation
Cover USB
Interface
Control
Switch
Toothbrush
Positioning
Mouth
UTS-001_M_20(2)
UTS-001
5V
0.3W
UV-C: 270-285nm
UV-A: 320-400nm
(H) 77 (W) 55 (D) 30 mm
50g
Model No.
Voltage:
UV Power
UV Wavelength:
Product Dimension
Net Weight
Specifications are subject to change without prior
notice.
If there is any inconsistency or ambiguity between
the English version and the Chinese version, the
Chinese version shall prevail.
Refer to
www.germanpool.com
for the most
up-to-date version of the Operating Instructions.
TOOTHBRUSH SANITIZER
UV-C
LED
UTS-001
