German pool EFB-326H, User Manual

Page: 4 / 15

P.7 P.6
1
2
3
4
5
9
10
11
6
7
8
Product Structure
FRONT BACK
This product uses PTC heating, send heat by hot air, which can quickly increase room temperature. It is
without open flame, safe, efficient and energy saving.
1. Cover
2.
Air Outlet
3. Air Duct
4. Body
5. Power Button
6. LED Display
7. Air Inlet
8. Base
9. Power Cable
10. On / Off Switch
11. Remote Control
Getting Started
Location
• Please put this product in a horizontal position.
Avoid putting it on a slope or a soft surface to
prevent it from falling over. Please do not use
it in high temperature area with high humidity,
such as bathroom and kitchen.
• Avoid blocking the Air Inlet and Outlet during
use. Please keep the product far away from the
curtains, so that they will not block the Inlet/
Outlet and obstruct the product from working.
• Do not place objects within 1 meter in front of
the Air Outlet to ensure that the volume of cool
air would not be reduced. Pay attention to the
effects on warm air blowing on objects.
Battery Installation Method
1. Open the Remote Control Battery Cover.
2.
Load two new AAA (No. 7) dry batteries.
3. Close the Battery Cover of the Remote Control.
Battery Cover
Caution:
This product includes an Overheat Protection Sensor, which is an automatic fail-proof safety protection
that cuts off power automatically when the product is accidentally tipped over or overheats. If this
sensor is triggered and the product is stopped, unplug the machine and let it cool. Check and remove
any obstructions before restarting the product and be sure to place it on a hard, level surface.
Caution:
• Do not charge this battery. Please keep out of
reach of children. If swallowed, please seek
medical advice promptly.
• Please insert the b
-
orientation correctly.
• If you do not use the Remote Control for a long
time, remove the battery.
• Dispose of used batteries in accordance with local
laws or regulations.
Do not place anything
within 1 meter
Do not cover,
high temperature!
keep a distance