GLP
German Light Products GmbH
(instruction version
1.07)
11
3.2 The Test Program
(TEST)
Test
The
Test-
Program allows you to run a complete self test procedure of all
functions. Press
Enter
to confirm or
Mode
to cancel.
(not available in the present software version)
3.3 The Audio Program
(AUDI)
The
Audio-
menu allows you to run a stand alone audio program. This chaser can
run either fast or slow.
AFST
: Every sound impulse on step of the chaser.
Aslw
:
Every second sound impulse one step of the chaser.
Additionally you can choose a basic position for this audio chaser. Use either the
internal manual mode or an external controller to set the desired Pan/Tilt position.
Confirm this setting in the
SVPT
menu by pressing the
Enter-
key.
You can also define the size of the audio chaser in the
SIZE
menu. You have the
choice between:
NORM
(no basic position has to bee chosen),
BIG
,
MIDL
and
SMAL
).
If you want to run the systems simultaneously, one of the
Y
Y
P
P
O
O
C
C
s
s
must be
switched as the master. All others must be "Slave" Master = OFF.
Notice:
The
Audio function is only working if
no
DMX signal is connected. This Audio program
can work on small events or as an emergency program.
3.4 Lamp
On/Off
(LAMP)
LAMP
Use the
Up/Down-
keys to select lamp
On
or lamp
Off
Press
Enter
to confirm or
Mode
to cancel and return to the main menu. (The lamp
OFF
command is only
functioning if the shutter is closed at the same time. Use an external controller or
the manual drive mode, see 3.9.1).
3.5 Reset
(RESE)
RESE
Press the
Enter-
key to run a reset of all fixture functions (
RST
is shown in the
display).
Performing a Reset will last approximately 30 seconds.
