Gericom Q10 Air, User Manual

Page: 56 / 62

ENGLISH Q10 Air
52
Display problems
The display panel is blank when the system is turned on
 Make sure the computer is not in the Standby or
Hibernate suspend modes. The display is turned off to
conserve energy in these modes.
The screen is difficult to read

The display resolution should at least be set to at least
1024x600 for optimal viewing.

Go to [Start > Settings > Control Panel] and double-click
the Display icon.

Under the Settings page, set screen resolution to at least
1024x600.
The screen flickers

It is normal if the display flickers a few times during
shutting down or powering up.
Keyboard and mouse problems
The built-in touch pad performs erratically

Make sure there is no excess perspiration or humidity on
your hand when using the touch pad. Keep the surface of
the touch pad clean and dry.

Do not rest your palm or wrist on the surface of the
touchpad while typing or using the touchpad.
The built-in keyboard accepts no input
 Please try to make sure the system didn’t hang up and is
still working.
The characters on the screen repeat while I type