Gerber Tempo 600, Setup Manual And Quick Start Manual, Page: 14 / 15

6. Set the cutting conditions
Typical settings
Material Thickness (mm) Blade Cutting Force Speed Quality
Outdoor vinyl 0.05 to 0.08 CB09UA 10-14 1-30 2
(for small size character cutting) 0.05 to 0.08 CB15UB 10-14 1-20 1
Film for decoration 0.08 to 0.1 CB09UA 14-17 1-30 2
Transparent/Translucent film 0.08 to 0.1 CB09UA 14-20 1-30 2
Reflective film 0.08 to 0.1 CB09UA 14-20 1-30 2
Fluorescent film 0.20 to 0.25 CB09UA 20-21 1-20 1
Fluorescent film 0.20 to 0.25 CB15U 20-21 1-20 1
Note: Adjust the cutting force so that the cutting trace lightly appears on the media liner, but
the blade does not cut through the liner.
CAUTION: Be sure to keep your hands, hair and face away from the moving parts
of the plotter.
14 of 15