Instructions for Use
Ambistik PFT-CPET
Serial no.: 2024xxxxx / 2025xxxxx
Version: 1 | Release date: 31 January 2022
Page 59
12.4
Electromagnetic Compatibility / EMC Guidelines
The manufacturer tests his products for emitted interference and
interference resistance. Compliance with the relevant standards
and directives is certified in the Declaration of Conformity that
accompanies this device. The results of the EMC test can be
found in the following chapter.
12.4.1
Emitted Interference Guideline and Manufacturer Declaration
Guidelines and manufacturer’s declaration – electromagnetic emissions
The Ambistik PFT / Ambistik CPET is determined for operation in an electromagnetic
environment as specified below. The user / operator of the Ambistik PFT / Ambistik CPET
should ensure that it is operated in this environment.
Measurement of
electromagnetic emissions
Compliance
Electromagnetic environment – Guideline
RF emissions CISPR 11
Group 1
The Ambistik PFT / Ambistik CPET uses RF
energy exclusively for its internal function.
Therefore, its RF emission is very low and is
improbable to interfere with adjacent electronic
equipment.
RF emissions CISPR 11
Class B
The Ambistik PFT / Ambistik CPET is suitable for
use in all establishments, including living areas and
those directly connected to the public supply
network, which also supplies buildings used for
residential purposes.
Emissions of harmonic
oscillations according to
IEC 61000-3-2
n/a
Emissions of voltage
fluctuations / flicker
according to
IEC 61000-3-3
n/a