Instructions for Use
Ergostik
Serial no.: xx|8|201|yyy and 2201xxxxx
Page 58
Version: 7 | Release date: 02. August 2021
7.4.1
Assembly Face Mask
1.
a) Assemble the mask
adapter [5] to the face
mask [6].
For this:
Press the adapter
through the round
opening of the silicone
mask so that the lower
ring of the adapter is
inserted into the incision
[6a].
b) Position the adapter.
For this:
Position the oval
opening [5a] of the
adapter vertically to the
face mask.
2.
Mount the flow sensor
in the Ergoclip adapter
on the face mask.
For this:
Press the flow sensor
with the patient close
side into the receptacle
provided on the
adapter.
5
6
6a
6a
5a
