Instructions for Use
Bodystik
Serial no.: xx|8|301|yyy and 2301xxxxx
Version: 7 | Release date: 02. August 2021
Page 67
6.2.3.2
Inserting the Flow Sensor
1.
Open the closing cap [2] on the flow
unit
For this:
Turn the screw lock [1] on the left and
right side
and
open the closure cap [2] upwards.
2.
Insert the flow sensor [3]
For this:
Carefully press the patient-far side with
connection piece [3b] into the holder
with silicone seal [4].
Press the patient-close side [3a] into
the receptacle.
3.
Close and lock the cover cap
For this:
Proceed in reverse order as described
in point 1.
Attention
Measurement function
could be impaired.
Therefore: Make sure that
the sensor pins [3a] inserted
in the silicone seal [4]!
2
1
1
3b
4
3
a
4
3a
3b
