Instructions for Use
Spirostik Blue
Serial no.:
2111xxxxx
Page 54
Version: 7 | Release date: 02. August 2021
7.2
Preparing the Device for Operation
To activate ready-for-operation state, please read:
•
Chap. 6.1.2 ff “Inserting the (rechargeable) Batteries
and preparing the Device for Operation”
7.3
Switching Spirostik Blue On / Off
As soon as the Spirostik Blue is supplied with power (batteries /
accumulators inserted), it is switched on and is initially in standby
mode.
When the movement is stopped, Spirostik Blue returns to
standby mode after a latency time (standard setting:
45 seconds).
When you take the Spirostik Blue in your hand, it detects
movement and automatically switches itself back on in standby
mode.
The latency time (standby mode
sleep mode) can be adjusted
by the operator / user in BLUE CHERRY®.
1.
User input in the field stand-by
time [1]
from 45 seconds (default setting) to
999 seconds
2.
Transfer the value to the Spirostik
Blue by pressing the “Close”
Button [2].
If you wish to turn off Spirostik Blue completely, you must
remove the accumulators.
1
2