Instructions for Use
Spirostik Blue
Serial no.: 2111xxxxx
Version: 7 | Release date: 02. August 2021
Page 43
4.1.5.2
Power Supply
The Spirostik Blue power supply takes place internally via two
accumulators. Their charge state is indicated via the status LED
on the Spirostik Blue hand grip.
If the display shows a low state of charge, the (rechargeable)
batteries should be replaced as soon as possible, otherwise
this may result in the interruption of a measurement.
For further information see:
•
Chap. 4.1.3 ”LED Status Display” – signaling
•
Chap. 6.1.2 “Inserting the (rechargeable) Batteries and
preparing the Device for Operation” – removing or
replacing the (rechargeable) batteries
Attention
Spirostik Blue could be damaged.
Reason: Leaking battery fluid Therefore:
•
Remove the (rechargeable) batteries when Spirostik
Blue is not being used for a longer period of time!
4.2
Technical Protection Measures
Spirostik Blue has been designed and built in accordance with the
recognised state of technology and the requirements of the
applicable, safety-relevant regulations.
The technical safety condition is checked by the authorised
specialist retail partner of the manufacturers within the framework
of technical monitoring (see also chapter 8 “Servicing /
Maintenance”).
You will find further information in:
•
Chap. 11.3.5 "Infectious / Contaminated Single Use
Items“ - Disposal of single use items
•
Chap. 9.2.2 "Reusable Flow Sensor and Mouthpiece"