SPECIFICATIONS & PARTS LIST
WARRANTY STATEMENT
Easy Sprayer Spray Paint Outfit
Congratulations on the purchase of your new GEPRO
Easy Sprayer painting outfit.
Providing that you take good care through regular
maintainence and cleaning procedures your GEPRO
Easy Sprayer will give you many years of trouble free
use. It is of utmost importance you read, understand and
practice the instructions that have been provided with
this machine. Proof of purchase must be provided when
making any claim for warranty.
1.
The Trade Practices Act 1974 (Commonwealth) and
similar State and Territory legislation relating to the
supply of goods and services, protects consumer's
interests by ensuring that customers are entitled in
certain situations to the benifit of various conditions,
warranties, guarantees, rights and remedies (including
warranties as to merchantability and fitness for purpose)
associated with the supply of good and services.
A consumer should seek legal advice as to the
nature and extent of these protected interests. In some
circumstances the supplier of goods and services may
legally stipulate that the said conditions, guarantees,
rights and remedies are limited or entirely excluded.
The warranties set out in clause 2 shall be additional to
any non excludable warranties to which the customer
may be entitled pursuant to any statue.
2.
Subject to Clause 3, GEPRO gives the following
warranties to the customer:
Insofar as they are manufactured or imported by
GEPRO Goods will, upon, be of
merchantable quality and reasonable fit for the purpose
or purposes for which they are supplied by GEPRO.
GEPRO will repair or, at its option, replace those of
the goods which, upon examination, are found by
GEPRO to be defective in workmanship and/or materials.
3.
The Warranty in Clause 2:
Is conditional upon:
The customer notifying GEPRO in writing of its
claim within Seven (7) days of becoming aware of the
basis thereof, and at its own expense returning the
goods which are the subject of the claim to GEPRO.
The equipment being used in accordance with
Manufacturer's Operating manuals, and under
competent supervision.
Does not apply to:
Components not of GEPRO manufacture, which are
contained within the goods.
Obsolete goods sold at auction, secondhand goods and
prototype goods.
Breakdown or malfunction caused by accident, misuse
or normal wear and tear.
Repair or replacement made other than by GEPRO
or it's Accredited Agents, unless by prior arrangements
with GEPRO.
4.
GEPRO hereby declares that, to the extent permitted
by law, it hereby limits its liability in respect of the
supply of good which are not of a kind ordinarily
acquired for personal, domestic or household use or
consumption to any one or more of the following (the
choice of which shall be at the option of GEPRO):
The replacement of the goods or the supply of
equivalent goods.
The repair of goods
The payment of the cost of replacing the goods or
acquiring equivalent goods.
The payment of the cost of having the goods repaired.
5.
Except as provided in Clause 2 to 4 above, to the
extent permitted by statute. GEPRO hereby excludes
all liability for any loss, damage, death or injury of any
kind whatsoever occaisioned to Customer in respect of
the supply of goods including direct, indirect
consequential or incidental loss, damage or injury of
any kind.
2 YEAR LIMITED WARRANTY
The GEPRO Easy Sprayer is covered by a two (2) year
from original date of purchase, domestic (home use)
limited warranty which protects the owner from faulty parts
or workmanship, selected parts as listed below are
deemed consumable, that is, they will wear with extended
use and are covered by a seperate six (6) month use
warranty.
A six (6) month warranty is provided to cover the
following parts from "NORMAL" use.
* Needle assembly * Air cap and nut * Lid washers
Warranty on commercial or industrial use is reduced to 30
days from purchase for faulty parts and workmanship and
excludes the following parts.
* Needle assembly * Air cap and nut * Lid washers
Warranty DOES NOT cover
* The Easy Sprayer for any other application other than
what it is designed for.
* Damage through abuse or neglect.
* Block spray guns through lack of cleaning and
maintainence.
* Worn components through extend use.
Item Part
No.
1 Paint Control Adjusting Screw
410697
2 Needle Assembly
410698
3 Paint Tube
410699
4 Aircap and Nut
416038
5 Lid Washers
410696
PARTS LIST
Materials:
Blower Unit - polypropylene Power required:
240 Volts, 1100 Watts
Spray Gun - nylon
5 Amps
Air Hose - PVC
Weight:
Spray gun , blower
Air supply
315 litres/minute
and hose
(10.9 cfm)
4.1kg, packed 4.4kg
15.5kPa (2.2 p.s.i.)
Accessories
Spray Gun (complete)
416040
Paint Container
410694
Thinning Cup
410695
Replacement Hose 3 metre
416041
Power Cord Storage
Caution: Power cord must be fully
extended during operation.
Manufactured by
GEPRO PTY LTD
Unit 3, 78 - 80 Bayfield Road, Bayswater Victoria 3153, Australia
In the interest of continuous improvement GEPRO PTY LTD reserves the
right to change the specifications or design of any of it's products without prior notice
Made in Tiawan
Copyright 2004
8
Customer Service Centre
1800 350 001
GEPRO Website Address
www.gepro.com.au
